How to edit Virtual Machines

Each Virtual Machine's component can be modified.

1. CPU configuration
2. Memory configuration
3. Disk configuration
4. Network configuration

1. CPU configuration

1-1. Go to Home > VMs and Templates.

1-2. Shutdown Virtual Machine then Right Click Virtual Machine > Edit.

Change number of CPU accordingly and submit OK.

1-3. Confirm new settings.

END

2. Memory configuration

2-1. Go to Home > VMs and Templates.

2-2. Shutdown Virtual Machine then Right Click Virtual Machine > Edit.

Change Memory Settings accordingly and submit OK.

2-3. Confirm Settings.

END

3. Disk configuration

There are two config options for Disk settings.

• Change Current Disk setting (refer 3-1.)  or 
• Add New Disk (refer 3-2.)

3-1. Change Current Disk setting

1. Go to Home > VMs and Templates.

 2. Shutdown Virtual Machine then Right Click Virtual Machine > Edit.

Change Hard Disk Settings accordingly and submit OK.  Please Make sure Format or Extend your Logical Disk Drive on your guest OS settings (i.e. Windows Disk Manager,  Linux LVM etc. )

END

3-2. Add New Disk

1. Go to Home > VMs and Templates.

 2. Shutdown Virtual Machine then Right Click Virtual Machine > Edit.

Select New Hard Drive and submit Add.

3. Find Newly Added Hard Disk and change disk capacity accordingly.

 4. Confirm settings. Please Make sure Format or Extend your Logical Disk Drive on your guest OS settings (i.e. Windows Disk Manager,  Linux LVM etc. )

END

4. Network configuration

There are two config options for network settings.

• Change Current Adapter setting (refer 4-1.)  or 
• Add New network Adapter (refer 4-2.)

4-1. Change Current Adapter setting 

1. Go to Home > VMs and Templates.

 2. Find a Virtual Machine and Right Click Edit.

Then, find a Network Adapter and pull-down list (LAN1, LAN2, etc) to select network and submit OK.  Please make sure you have configured an IP address (i.e. default gateway, subnet mask and DNS) settings on the Guest OS.

END

4-2. Add New network Adapter

 1. Go to Home > VMs and Templates.

2. Right Click Virtual Machine and click Edit. Select Network and submit Add.

 3. Modify Network property  (select LAN connection and Adapter Type) and submit OK.   For Adapter Type selection (E1000, E1000e, VMXNET) please refer VMware Documentation

 4. Confirm settings.  Please make sure you have configured an IP address (i.e. default gateway, subnet mask and DNS) settings on the Guest OS.

END